▶
English
▶
Issues Solutions and Explanations
The picture is distorted: macro
block error, small block, dots,
pixelization
•
The compression of video contents may cause picture distortion
especially in fast moving pictures such as sports and action movies.
•
A weak signal can cause picture distortion. This is not a TV issue.
•
Mobile phones used close to the TV (within 3.3 ft.) may cause noise in
the picture on analog and digital channels.
Color is wrong or missing.
•
If you’re using a component connection, make sure the component
cables are connected to the correct jacks. Incorrect or loose connections
may cause color problems or a blank screen.
There is poor color or the
picture is not bright enough.
•
Adjust the Picture options in the TV menu (go to Picture Mode / Color /
Brightness / Sharpness)
•
Adjust the Energy Saving option in the TV menu (go to MENU – System
– Eco Solution – Energy Saving)
•
Try resetting the picture to view the default picture settings (go to MENU
- Picture - Reset Picture)
There is a dotted line on the
edge of the screen.
•
If the picture size is set to Screen Fit, change it to 16:9.
•
Change the cable/satellite box resolution.
The picture is black and white.
•
If you are using an AV composite input, connect the video cable (yellow)
to the Green jack of Component input 1 on the TV.
To Next Page
Loading...
