▶
English
▶
5. If you selected Cable, the Cable System screen appears. Select Digital, and
then press ENTER
E
.
N
If you selected Air only, Auto Program starts.
6. Select STD, HRC, or IRC, and then press ENTER
E
.
7. Repeat for Analog.
8. Select Search or Next, and then press ENTER
E
. Auto Program starts.
N
After all the available channels are stored, Auto Program removes scrambled
channels. When done, the Auto Program menu then reappears. This process
can take up to 30 minutes.
To Next Page
Loading...
