▶
English
▶
■
Automatic Network Setup
Use the Automatic Network Setup when connecting your TV to a network that
supports DHCP. To set up your TV’s cable network connection automatically,
follow these steps:
How to set up automatically
1. Go to the Network Settings screen.
(MENU
m
→
Network
→
Network
Settings
→
ENTER
E
)
2. Select Wired, and then press ENTER
E
.
3. The network test screen appears and
verifies the network connection. When the
connection has been verified, the “Internet
connection successful.” message appears.
● The displayed image may differ depending on the
model.
U
Move
E
Enter
R
Return
Network Settings
Select a network connection type.
Wired
Wireless(General)
WPS(PBC)
One Foot
Connection
Connect to the network using LAN cable. Please
make sure that the LAN cable is connected.
To Next Page
Loading...
