▶
English
▶
How to set up manually
To set up your TV’s cable network connection manually, follow these steps:
1. Go to the Network Settings screen. (MENU
m
→
Network
→
Network Settings
→
ENTER
E
)
2. Select Wired, press ENTER
E
, then press
ENTER
E
again. The network test screen
appears and the verification process starts.
3. Press ENTER
E
. The verification process stops.
Select IP Settings on network test screen. The
IP Settings screen appears.
● The displayed image may differ depending on
the model.
U
Move
E
Enter
R
Return
IP Settings
Internet Protocol Setup : Manual
►
IP Address
. . .
Subnet Mask
. . .
Gateway
. . .
DNS : Manual
DNS Server
. . .
OK
To Next Page
Loading...
