▶
English
▶
8. Repeat the entry process for each field in the IP Address.
N
If you make a mistake when entering a number, re-enter the number to correct
it. You can also press the up or down arrow button to change the number one
unit at a time.
9. When done entering the IP Address, press ENTER
E
.
10. Press the down arrow key to go to the Subnet Mask fields, and then press
ENTER
E
.
11. Repeat the same entry process for Subnet Mask, Gateway, and DNS Server.
12. When done, select OK at the bottom of the page, and then press ENTER
E
.
The network test screen appears and the verification process starts. When the
connection has been verified, the “Internet connection successful.” message
appears.
To Next Page
Loading...
