▶
English
▶
7. When done, use the
r
button to move the cursor to Done, and then press the
ENTER
E
button.
8. The network test screen appears and the verification process starts. Press
ENTER
E
to cancel. Select IP Settings on network test screen. The IP
Settings screen appears.
9. On the top, press ENTER
E
, and then set IP Mode to Manual.
10. Press the
d
button on your remote to go to the IP Address entry field, and
then press ENTER
E
.
11. Enter the first portion of the IP Address (for example, 105) into the first entry
field using the number keys on your remote. Press the
r
button to go to the
next field.
12. Enter the next portion of the IP Address. Press the right arrow button to go to
the next field.
To Next Page
Loading...
