▶
English
▶
Manual: Set the current time manually.
N
Depending on the broadcast station and signal, the auto time set up
may not be correct. In this case, set the time manually.
–
Clock Set: Set the Month, Day, Year, Hour, Minute and am/pm.
N
Select Clock Set. Select Date or Time, and then press ENTER
E
. Use
the number buttons to enter numbers or press the up and down arrow
buttons. Use the left and right arrow buttons to move from one entry
field to the next. Press ENTER
E
when done. To exit Clock Set, select
Close, and press ENTER
E
.
N
Available only when Clock Mode is set to Manual.
N
You can set the month, day, year, hour, minute and am/pm directly by
pressing the number buttons on the remote control.
To Next Page
Loading...
