Samsung PN51E490B4F - Troubleshooting Common Issues; Flickering and Dimming; Component;Screen Color Issues; Screen Brightness Adjustment

◀ ▶
English
7. Select STD, HRC, or IRC, and then press ENTER
E
.
8. Repeat for Analog Cable System.
9. Select Next, and then press ENTER
E
. Auto Program starts.
N
After all the available channels are stored, Auto Program removes scrambled
channels. When done, the Auto Program menu then reappears.This process
can take up to 30 minutes.
How to Stop Auto Programming
1. Press the ENTER
E
button to select Stop.
2. A message will ask Stop Auto Program? Select Yes by pressing the
▲
or
▼
button.
3. Press the ENTER
E
button.