◀ ▶
English
Issues Solutions and Explanations
RF(Cable/Antenna) Connection
The TV is not receiving all
channels.
• Make sure the coaxial cable is connected securely.
• Run Auto Program to add available channels to the channel list. Go
to MENU - Channel - Auto Program then select Auto and make
sure to select the correct Cable TV signal type. There are 3 options,
STD, HRC and IRC. Most cable systems use STD.
• Verify the antenna is positioned correctly.
No Caption on digital
channels.
• Check the Caption Setup menu. Try changing Caption Mode
Service 1 to CC1.
• Some channels may not have caption data.
The picture is distorted:
macroblock, error, small
block, dots, pixelization.
• Compression of video contents may cause picture distortion,
especially on fast moving pictures such as sports and action movies.
• A weak signal can cause picture distortion. This is not a TV problem.
To Next Page
Loading...
