◀ ▶
English
How to set up manually
To set up your TV’s cable network connection manually, follow these steps:
1. Go to the Network Settings screen.
(MENU
m
→
Network
→
Network
Settings
→
ENTER
E
)
2. Select Start, and then press ENTER
E
.
The network connection screen appears
and the verification process starts.
3. Press ENTER
E
. The verification process
stops. Select IP Settings on network
connection screen. The IP Settings screen
appears.
4. In the top entry field, press ENTER
E
, and then set IP Mode to Manual.
IP Settings
IP Mode Manual
DNS Mode Manual
DNS Server 0 . 0 . 0 . 0
R
Return
IP Address 0 . 0 . 0 . 0
Subnet Mask 0 . 0 . 0 . 0
Gateway 0 . 0 . 0 . 0
OK
To Next Page
Loading...
