®
®
IExpe£ IRattem: By running the IExpe£ IRattem function, you can calibrate
the picture without a generator or filter, If the OSD menu disappears or a
menu other than the Picture menu is opened, the TV saves the calibration
and the IExpe_ IPattem window disappears,
[_ While the IE:xpe_ IRattem is running, the TV does not output sound,
[_ Only enabled when you select a Component or HDMI source,
Reduces power consumption by reducing screen brightness
when the picture on the screen is motionless,
[_ This function is not supported in 311[',,')mode,
%
%
When you change the IBack_ight /Oe_ Light
Contrast, or IBdghtness, the TV sets Motion ILig to Off,
Only available in Standard mode,
English
To Next Page
Loading...
