Samsung PN60E6500EFXZA - Page 19

English - 19
Setting up Universal Remote with Universal Remote Code Set
If your remote controller buttons does not work, please set your remote to TV mode by using the DEVICE
button.
1. To set up Universal Remote, press the SETUP button on your remote for 3 seconds. All the LEDs on
the top of your remote blink twice simulaneously.
2. Press the 1 button on your remote to select a Set-top box.
3. Press the number button corresponding to the port of device connected.
✎
Port numbers are as follows:
1 2 3 5 7
HDMI 1/DVI HDMI 2 HDMI 3 AV Component
4. Enter Universal Remote Code corresponding to device you have.
✎
For more detailed information about Universal Remote Code, refer to "Universal Remote Code Set list"
on page 20.
Using your remote as a Universal Remote
In Universal Remote mode, you can use your remote to control your TV and STB together, your TV alone,
or your STB alone. When you have set your remote to control your TV and STB, certain buttons control the
TV only and certain buttons control the STB only.
• Controlling the TV and STB Together
To control your TV and STB together, press the WATCH TV button at the top
center of your remote. The TV and STB LEDs go on and off. If the TV is on, it
automatically changes to the source the STB is connected to.
You can control the TV and Set-Top box using the universal remote. (For
example, press the Volume button to adjust the TV volume, press the
channel button to change the STB channels, etc.)
✎
See the illustration to the right. When you are using the remote as a
universal remote, the buttons demarcated for TV control the TV only and
the buttons demarcated for STB control the set top box only.
✎
To turn only the TV off, press the DEVICE button, change to TV mode,
and then press the P button. To turn only the STB off, press the
DEVICE button, change to STB mode, andthen press the P button.
To turn the TV and the STB off, press the P button and hold it for two
seconds.
• Controlling the TV only.
Press the DEVICE button and change to TV mode. The TV LED goes on and off. You can only control
the TV using the universal remote.
• Controlling the STB only
Press the DEVICE button and change to STB mode. The STB LED goes on and off. You can only
control the Set-Top box using the universal remote.
S
ETUP
W
AT
C
H
TV
DEVI
CE
U
NIVER
S
AL REM
O
TE
SOURC
E
TV
S
TB
MUT
E
MEN
U
SEARC
H
INF
O
T
OOL
S
RETURN
Family
S
tor
y
MT
S
SUPPOR
T
P
.SIZE CC
PRE-C
H
C
H LIS
T
M
B
l
l
l
l
l
l
l
l
l
l
Family Story MTS
SUPPORT P. SIZE CC
Family Story MTS
SUPPORT P. SIZE CC
MUTE
MENU
SEARCH
INFO
TOOLS
RETURN EXIT
PRE-CH
CH LIST
M
MUTE
MENU
SEARCH
INFO
TOOLS
RETURN EXIT
PRE-CH
CH LIST
M
l
l
l
l
l
l
l
l
MUTE
MENU
SEARCH
INFO
TOOLS
RETURN EXIT
PRE-CH
CH LIST
M
MUTE
MENU
SEARCH
INFO
TOOLS
RETURN EXIT
PRE-CH
CH LIST
M
l
l
l
l
l
l
l
l
TV
STB
MUTE
MENU
CH LIST
M
MUTE
MENU
CH LIST
M
[PE6500-ZA]BN68-04195A-X0Eng.indb 19 2012-02-11 �� 3:01:42