Configuring Detailed Settings on the Picture
You can set detailed picture settings.
1 Press the MENU button to display the menu.
2 Press the ENTER button to select Picture.
3 Press the ▲ or ▼ button to select Detailed Settings, then
press the ENTER button.
4 Select the required option by pressing the ▲ or ▼ button, then
press the ENTER button.
Available options: Black Adjust
, Dynamic Contrast, Gamma,
Colour Space, White Balance, My Colour Control, Edge
Enhancement.
5 When you are satisfied with your setting, press the ENTER
button.
6 Press the EXIT button to exit.
➢
When the picture mode is set to Standard or Movie, Detailed
Settings can be selected.
➢
If DNIe is Off, the Detailed Settings cannot be selected when
the Picture mode is in Standard mode.
Black Adjust: Off/Low/Medium/High
You can directly select the black level on the screen to adjust the screen depth.
Dynamic Contrast: Off/Low/Medium/High
You can adjust the screen contrast so that the optimal contrast is provided.
Gamma: -3 ~ +3
You can adjust the middle brightness of pictures.
Press the ◄ or ► button until you reach the optimal setting.
Colour Space: Auto/Wide
You can set the colour reproduction space for the input signal to Auto or Wide.
White Balance: R-Offset/G-Offset/B-Offset/R-Gain/G-Gain/B-Gain/Reset
You can adjust the colour temperature for more natural picture colours.
− R-Offset/G-Offset/B-Offset/R-Gain/G-Gain/B-Gain:
Changing the adjustment value will refresh the adjusted screen.
Select the required option by pressing the ▲ or ▼ button, then press the ENTER button.
Press the ◄ or ► button until you reach the optimal setting.
− Reset: The previously adjusted white balance will be reset to the factory defaults.
My Colour Control: Pink/Green/Blue/White/Reset
This setting can be adjusted to suit your personal preferences.
− Pink/Green/Blue/White: Changing the adjustment value will refresh the adjusted screen.
Select the required option by pressing the ▲ or ▼ button, then press the ENTER button.
Press the ◄ or ► button until you reach the optimal setting.
➢
When running the My Colour Control feature, the current picture is captured as a still image
before being displayed on the screen.
− Reset: The previously adjusted colours will be reset to the factory defaults.
Edge Enhancement: Off/On
You can emphasize object boundaries.
Move
Enter
Return
Black Adjust :
Low
Dynamic Contrast : Low
Gamma : 0
Colour Space : Wide
White Balance
My Colour Control
Edge Enhancement.
: On
Detailed Settings
T V
Move
Enter
Return
More
Detailed Settings
Size : 16 : 9
Digital NR : Auto
Active Colour : On
DNIe : On
Reset : OK
Picture
T V
To Next Page
Loading...
