Disassembly & Reassembly
Samsung Electronics 12-5
12-1-12 Separation of ASSY PCB P-SMPS & SMPS DC-DC
Part Name Description Description Photo
SMPS
&
SMPS
DC-DC
Board
① Detach all connectors from the Assy PCB P-SMPS.
② Remove 8 screws.
: PH,+,WWP,M3,L8,NI PLT
③ Remove the Assy SMPS PCB.
④ Detach all connectors from the Assy SMPS DC/DC
Board.
⑤ Remove 4 screws.
: PH,+,WWP,M3,L8,NI PLT
⑥ Remove the SMPS DC/DC Board.
: Wear gloves when handling the power board as there
may be some remaining electrical charge in the capacitor.
Specifically, avoid touching any part of the capacitor.
12-1-13 Separation of ASSY PDP MODULE P-LOGIC MAIN BOARD
Part Name Description Description Photo
Logic
Board
① Detach all connectors from the Logic Main Board.
② Remove 4 screws.
: WSP,PH,+,M3,L8,NI PLT
③ Remove the Logic Main Board.
To Next Page
Loading...
