Troubleshooting
Samsung Electronics 4-33
4-3-2 How to Check the Version of the Program
1. Procedures for checking in the Factory Menu.
When entering Factory Mode, the version of the software is displayed at the bottom of the menu as described on page 4-17.
Panel ON Time(Hour) 0002 C4A_RMA
1. Calibration 7. YC Delay
2. Option Table 8. Adjust
3. White Balance 9. I2C Check
4. SVP-UX 10. W/B MOVIE
5. Option Block 11. Checksum
6. SGTV5810/NTP3000 12. Reset
13. Spread Specturm
T-CALMPEUH-xxxx (Main Micom Ver)
T-BDPMPEUS-xxxx
BORD2_CALLA_TR-xxxx (TR Ver)
Month / Day / Year / Hour / Min. / Sec.
S/W Version
To Next Page
Loading...
