Samsung PS50A410 - Picture Options

English - 20
Picture Options
You can set detailed picture settings.
1 Press the MENU button to display the menu.
2 Press the ENTER button to select Picture.
3 Pressthe▲or▼buttontoselectPicture Options, then press
the ENTER button.
4 Selecttherequiredoptionbypressingthe▲or▼button,then
press the ENTER button.
5 When you are satisfied with your setting, press the ENTER
button.
6 Press the EXIT button to exit.
➢
In PC mode, you can only make changes to the Color Tone,
Size and Screen Burn Protection from among the items in
Picture Options.
Colour Tone: Cool2/Cool1/Normal/Warm1/Warm2
➢
When the picture mode is set to Dynamic or Standard,
Warm1 and Warm2 cannot be selected.
Size: Auto Wide/16:9/Wide Zoom/Zoom/4:3/Just Scan
You can select the picture size which best corresponds to your
viewing requirements.
 −
Auto Wide: Expanding and pulling up the picture from 4:3 to
16:9 ratio.
 −16:9
: Sets the picture to 16:9 wide mode.
 −
Wide Zoom: Magnify the size of the picture more than 4:3.
Movethescreenup/downusingthe▲or▼buttonafter
selecting the bypressingthe►orENTER button.
 −
Zoom: Magnify the size of the picture vertically on screen.
 −4:3
: Sets the picture to 4:3 normal mode.
 −
Just Scan: Use the function to see the full image without any
cutoff when HDMI (720p/1080i) or Component (1080i) signals
are input.
After selecting Just Scan in HDMI (1080i) or Component
(1080i) mode
:
  Pressthe◄or►buttontoselect
, then press the ENTER button.
  Pressthe▲,▼,◄or►buttontomovethepictureup,down,leftandright.
Reset:Pressthe◄or►buttontoselectReset, then press the ENTER button. You can initialize
the setting.
  ➢
With the HDMI Just Scan picture size, depending on the AV devices, the screen may be cut off
or a specific colour appears on the screen.
➢
For an HDMI (1080p) connection of 24, 25, 30, 50, and 60 Hz, and for a Component (1080p)
connection of 50 and 60Hz, only the input source is supported.
➢
You can change the picture size simply by pressing the P.SIZE button on the remote control.
➢
Depending on the input source, the picture size options may vary.
➢
The items available may differ depending on the selected mode.
➢
Auto Wide function is available only in TV, Ext.1, Ext.2, AV, and S-Video mode.
➢
Settings can be adjusted and stored for each external device you have connected to an input of the
TV.
➢
In PC Mode, only “16:9” and “4:3” mode can be adjusted.
Positioning and Sizing the screen using Zoom
Resizing the screen using the Zoom enables the positioning and sizing of the screen to up/down
directionusingthe▲or▼buttonaswellasthescreensize.
Movethescreenup/downusingthe▲or▼buttonafterselectingthe bypressingthe◄or►
button.
Resizethescreenverticallyusingthe▲or▼buttonafterselectingthe bypressingthe◄or►
button.
Continued...
Move Enter Return
Colour Tone :
Normal 
Size : Auto Wide 
Screen Mode : 16:9 
Digital NR : Auto 
DNle : On 
HDMI Black Level : Normal 
Blue only mode : Off 
Screen Burn Protection 
Picture Options
T V
Move Enter Return
Mode : Standard

Cell Light 7
Contrast 95
Brightness 45
Sharpness 50
Colour 50
Tint G50 R50
Detailed Settings 
Picture Options 
Reset : OK 
Picture
T V
Move Enter Return
Auto Wide
16:9
Wide Zoom
Zoom
4:3
Just Scan
Size
T V
BN68-01423EF-00Eng.indb 20 2008-04-14 오후 6:36:49