Samsung QE55Q95T - Running the Initial Setup; Setup Overview and Prerequisites; Manual Setup and TV Controller Usage; Using the TV Controller

settings for the TV to operate, such as broadcast reception, channel search, and network connection, at one time.
Before starting the Initial Setup, be sure to connect external devices first.
To use the TV’s smart features, the TV must be connected to the Internet.
To perform Initial Setup using the SmartThings app, you must connect your mobile device via Wi-Fi.
If the pop-up for setup does not appear automatically in the SmartThings app on your mobile device,
continue setup manually after adding the TV using Add Device on the dashboard of the SmartThings app.
The SmartThings app is available for mobile devices running Android 6.0 or higher or iOS 10 or higher.
Noise may occur temporarily when the TV communicates with mobile devices.
You can also start the Initial Setup using the TV’s menu ( > Settings > General > Reset). Follow the instructions displayed
on the Initial Setup screen and configure the TV’s basic settings to suit your viewing environment.
Using the TV Controller
You can use the TV Controller on the bottom of the TV instead of the remote control to control most of the functions of your TV.
While watching TV, you can change the channel by pressing the up and down directional buttons on the TV Controller or adjust the
volume by pressing the left and right directional buttons. Press the
on the TV Controller to display the Control menu. To run an item on the menu, press the directional buttons on the TV Controller
to move the focus to the item, and then press the button on the TV Controller.
The screen may dim if the protective film on the SAMSUNG logo or the bottom of the TV is not detached. Please remove the
protective film.
:Smart Hub
:Settings
:Return
:Source
:Power off
TV Controller / Remote control sensor
Press button: Display the Control menu. Select or run a focused item on the menu.
Press and hold button: The running function is terminated.
Up/Down button: Changes the channel.
Left/Right button: Changes the volume. The TV Controller is located on the bottom of the TV.
Setting the sound sensor