Samsung QE55Q95T - The Samsung Smart Remote (Continued); Advanced Remote Functions and Pairing; Installing Remote Batteries

Runs Bixby. Press and hold the button, say a command, and then release the button to run Bixby. When you press the button, the
Explore Now menu appears at the bottom of the screen
The supported Bixby’s languages and features may differ by geographical region.
(Ambient Mode)
In TV mode, press this button to enter Ambient Mode. If you press the button when the TV is turned off, the TV turns on in Ambient
Mode
When pressed for1 second or more, the Shortcuts menu screen appears.
Directional button (up/down/left/ right)
Moves the focus and changes the values seen on the TV’s menu.
+/- (Volume)
Move the button up or down to adjust the volume. To mute the sound, press the button. When pressed for 1 second or more, the
Accessibility Shortcuts menu appears.
/ (Channel)
Move the button up or down to change the channel. To see the Guide screen, press the button
When pressed for1 second or more, the Channel List screen appears. Press each button to run its function.
Pairing the TV to the Samsung Smart Remote
When you turn on the TV for the first time, the Samsung Smart Remote pairs to the TV automatically. If the Samsung Smart Remote
does not pair to the TV automatically, point it at the remote control sensor of the TV, and then press and hold the buttons labelled
and as shown in the figure on the left simultaneously for 3 seconds or more.
Installing batteries into the Samsung Smart Remote
1. Press the button at the top rear of the Samsung Smart Remote. The body will pop out slightly from the body cover.
2. Turn the remote over, and then slide the body of the remote upwards until the battery compartment is revealed.
3. If there are batteries in the remote, press the and buttons on both sides of the battery compartment to remove the
existing batteries
4. Insert two new batteries (1.5V AAA type) into the battery compartment making sure that the batteries’ polarities (+, -) are
oriented correctly. When done, slide the body of the remote until it is nearly in its original position.
5. Turn the remote over, press and hold the button on the top rear, and then slide the body of the remote down into place
Alkaline batteries are recommended for longer battery life.
Running the Initial Setup
When you turn on your TV for the first time, it immediately starts the Initial Setup. The Initial Setup allows you to configure the basic