What to do if Samsung QN32Q50RAF UHD TV IR operation not responding?
If the IR operation on your Samsung UHD TV isn't responding to standard remote commands, check the SDA and SCL for an effective 3.3Vdc after powering on. If this voltage is missing, suspect a problem with the Function Assy, Cable Assy, or Main Assy.
Why is the LED on my Samsung QN32Q50RAF on?
The LED on your Samsung UHD TV might be on because the Switch Operation activates on-screen display, the Key_Input 1 (pin 6) changes to 0V with a command, or there's an issue with the switch, such as it being stuck or malfunctioning.
Step-by-step instructions for safely taking apart the television for repair or inspection.
Methods for safely opening the TV's rear cover using specialized tools and releasing clips.
Steps for disconnecting speaker, network, and other internal cables before board removal.
Detailed steps for safely removing the main PCB and SMPS board, including safety measures.
Essential guidelines for safe operation and servicing to prevent hazards like electric shock.
Crucial steps for technicians, including general servicing and static discharge prevention for component safety.
Guidelines for safe setup, ventilation, and preventing fire/shock hazards.
General TV model info, dimensions, weight, color, and basic product details.
Comprehensive specs for display, video, audio, connectivity, and smart features.
Explains Smart Hub, Ambient Mode, Shortcuts, and Bixby for enhanced user experience.
Guides for using the Samsung Smart Remote and the TV's built-in controller.
Diagnosing problems with power, standby, and basic function controls.
Troubleshooting picture quality, sound issues, and board-related problems.
Solutions for connectivity, Smart Hub access, and Bluetooth/WiFi module problems.
Accessing factory settings, adjusting options, and updating TV software.
Detailed instructions for adjusting factory options, writing types, and model codes.
Steps for main board replacement, factory data input, and white balance calibration.
Interpreting LED flash codes and procedures for updating TV software.
Block diagrams showing internal connections and specific cable part information.
Identification and pin mapping for connectors on the main and SMPS boards.
To Next Page
General