Samsung QN900C Series User Manual

ENG - 14
Manually connecting the Subwoofer or Surround Speakers
Before performing the manual connection procedure below:
• Check whether the power cables for the Soundbar and subwoofer or Surround Speakers are connected properly.
• Make sure that the Soundbar is turned off.
1. Turn off the Soundbar main.
2. Press and hold ID SET on the rear of the subwoofer and surround speakers for at least 5 seconds.
• The red indicator at the rear of each speaker turns off and the blue indicator blinks.
5 Sec
Blinking
blue fast
Rear of Subwoofer Rear of Subwoofer
Blinking blue fast
POWER
x 2
Rear of the Left and Right Surround Speakers
5 Sec
3. Press the Up button on the remote control for 5 seconds.
• The ID SET message appears on the display of the Soundbar for a moment, and then it disappears.
• The Soundbar will automatically power on when ID SET is complete.
SOUND
MODE
PAIR
5 Sec
ID SET
4. Check if the LINK LED is solid blue (connection complete).
LINK LED - Blue is On The LINK LED indicator stops blinking and glows a solid blue when a connection
is established between the Soundbar and the Wireless Subwoofer, surround
speakers.

Samsung QN900C Series Specifications

General

Series	QN900C
Category	Smart TV
Display Type	Neo QLED
Screen Size	65", 75", 85"
HDR	Quantum HDR 64x
Voice Assistants	Bixby, Alexa, Google Assistant
HDMI Ports	4
USB Ports	3
Refresh Rate	120Hz
Object Tracking Sound	OTS Pro
Bluetooth	Yes (BT5.2)
Wi-Fi	Yes (WiFi6E)
Dimensions (Without Stand)	Varies by screen size
Weight (Without Stand)	Varies by screen size
Resolution	8K (7, 680 x 4, 320)
Operating System	Tizen
Smart Features	Multi View
Audio	Dolby Atmos