3-7
3. Disassembly and Reassembly
- 이 문서는 삼성전자의 기술 자산으로 승인자만이 사용할 수 있습니다 -
- This Document can not be used without Samsung's authorization -
R530/R730
Part Picture Description
Main
System
19. Remove 3 cables (LCD, ODD and USB board).
20. Remove the Main board.
1) Remove the screws which x the Main board and then
separate Main board from Bottom.
(M2 x L4: 2 EA)
21. Conditions of Main board which is separated.
1
2
22. Remove the plate for protecting against heat of CPU and
Graphic chip.
1) Remove the screws. (6 EA)
2) Remove the cooling fan connector.
3) Remove the plate by lifting it up.
To Next Page
Loading...
