3-8
3. Disassembly and Reassembly
- 이 문서는 삼성전자의 기술 자산으로 승인자만이 사용할 수 있습니다 -
- This Document can not be used without Samsung's authorization -
R530/R730
Part Picture Description
Main
System
23. Conditions after removing the cooling fan
24. Remove the CPU.
1) Lift CPU up after rotating the screw for xing CPU to
counterclockwise fully.
25. Remove the WLAN board.
1) Remove the screw (1EA) for xing the WLAN Board.
(M2 X L3 1ea, Black)
2) Remove the WLAN Board from the connector.
26. Remove the RTC.
1) Place Main board upside down.
2) With pushing and lifting up the RTC to arrow direction
by using nger, remove the RTC from the socket of main
board.
[Notice]
Carefully remove it because RTC socket is xed with plastic
material.
To Next Page
Loading...
