Samsung R710 User Manual

1-1
1.
Precautions
1)
General After-Sales Service Precautions
(1)
Do not let customers repair the product themselves
.
☞
There is
a
danger of injury and the product life time may be shortened
.
(2)
Make sure to disconnect the power cord from the wall outlet before repairing the product
.
(
especially for after-sales service of electric part
s)
☞
There is
a
danger of electric shock
.
(3)
Do not let customers plug several electric home appliances into
a
single wall outlet at the same
time
.
☞
There is
a
danger of fire due to overheating
.
(4)
Check if the power plug or wall outlet are damaged in any way.
☞
If
a
defect is found, repair or replace it immediately
.(
There is
a
danger of electric shock or fire)
(5)
Make sure that it is properly grounded
.(
Check the ground of the wall outlet
)
☞
Electricity leakage may cause electric shock
.
(6)
Do not spray water on to the product to clean it
.
☞
There is
a
danger of electric shock or fire and it may shorten the lifetime of the product.
(7)
Check the assembly status of the product after the after-sales service
.
☞
Make sure the product is re-assembled correctly before returning to customer
(8)
Unplug the power
cord
holding the power plug
(
and not the cord).
☞
If the cord is disconnected, it may cause electric shock or fire.
(9)
Repair the product using only authorized part
s.
(10)
Keep the product away from heating devices such as heaters
.
☞
Exposure to heaters may cause deformation of the product or fire.
- This Document can not be used without Samsung's authorization -

Samsung R710 Specifications

General

RAM	Up to 4GB DDR2
Storage	Up to 320GB HDD
Processor	Intel Core 2 Duo
Graphics	NVIDIA GeForce
Operating System	Windows
Weight	3.2 kg
Battery	6-cell Lithium-Ion

Summary

Precautions

General After-Sales Service Precautions

General safety guidelines for after-sales service to prevent injury and product damage.

Safety Precautions

Important safety measures for handling electronic components and the product.

Ground

Instructions on how to properly ground the product to protect from electrical hazards.

Static Electricity Precautions

Methods to prevent static discharge damage to sensitive electronic components.

Introduction and Specification

Introduction

Overview of the product's key features and performance aspects.

Specification

Detailed technical specifications of the product's hardware components.

Key Feature

Comparison of key features between different models (R700 vs R710).

Option Partlist

List of optional parts available for the product, including hard drives and memory.

Product Feature

Visual overview of the product's main components and their locations.

New Function

Details on new or optional features like the internal camera and Blu-Ray drive.

Camera (Option)

Information about the optional internal camera for video and photo capture.

Blu-Ray(Option)

Details on the optional Blu-Ray drive's capabilities and supported disk types.

New Keyboard

Information and layout of the keyboard, including special function keys.

Disassembly and Reassembly

Disassembly and Reassembly of R700

Step-by-step guide for disassembling the main system components of the R700 model.

Troubleshooting

General

Lists necessary tools and replaceable units (FRUs) for product repair.

Debugging Flow Chart

Visual guide to diagnose and troubleshoot common hardware and software issues.

System Diagnosis

Information on using a diagnostics card and understanding POST error codes.

Use of diagnostic program

Instructions on how to use the Windiag diagnostic program for system testing.

Hardware Troubleshooting

Detailed steps for troubleshooting common hardware problems like LCD, system power, and connectivity.

CPU Fan Control

Guide on checking and adjusting the CPU fan's operational status and speed.

Device Settings Related Software Diagnosis

Steps to check driver installation, version conflicts, and program installation.

Battery Use Time

Checklists and criteria for diagnosing short battery usage time issues.

Etc.

Lists CPU types and model name/specifications for transaction groups.

Memory addition method

Step-by-step instructions on how to add or replace memory modules in the system.

System Wire Diagram

Top

Diagram showing the top view of the system's internal wiring connections.

Bottom

Diagram illustrating the wiring connections on the bottom view of the system.

LCD

Wiring diagram specifically for the LCD panel and its related components.

Exploded view

BOM

Schematic