REMOVING THE FREEZER ACCESSORIES
2. Freezer Drawer Bin
To remove - Pull the drawer out fully. Tilt up
the rear of the bin and lift it out to
remove.
To replace - Place the bin into the rail assembly.
1. Pull Out Drawer
To remove - Pull the drawer out to full extension.
Tilt up rear of drawer and lift straight out.
(Refer to picture 1 & 2)
Bin
Operating your SAMSUNG Refrigerator
1
2
3
To replace - Place the drawer onto the rails by tilting it
up. Lower the drawer into place until it is
horizontal and slide the drawer in.
(Refer to picture 3)
Open the freezer door fully and remove the drawer.
When replacing, place the drawer bin holder
into the hole of the rail
Drawer
22_ Operating
To Next Page
Loading...
