Samsung RB214 - Setting Up Your Refrigerator - Door Removal; Removing Refrigerator Doors

setting up _11
01 SETTING UP
REMOVING THE REFRIGERATOR DOORS
Phillips Head Driver(+) Flat Head Driver(-) Socket Wrench
(10mm) (for bolts)
Hex Wrench (4.75mm)
(for Mid hinge)
Hex wrench (4mm)
(for Mid hinge shaft)

Some installations require door/drawer removal to transport the Refrigerator to its final location.
Do not remove the door/drawer if it is not needed. Before removing the door/drawer make sure you read
following items.
Disconnect power to the Refrigerator before remove door or drawer.
WARNING
•Becarefulnottodropthedooranddoorscratchanddamagewhileremovingthedoor/drawer.
•Becarefulnottogetinjuredwhileremovingthedoor/drawer.
•Afterreattachingthedoor/drawer:
It is possible to have sweat by air leakage.
It is possible to have uneven door alignment.
It is possible to have more energy bills.
DA68-01802A.indb 11 2010.4.23 3:26:39 PM