English - 3
Handle replacement
Tools required (not provided)
To detach the handles
NOTE
This procedure applies to both the fridge and freezer compartment.
Model name looks like this: RB29F*, RB29H*, RB30J*, RB31F*, RB31H*, RB33J*, RB34J*, RB3CJ*
What replaces the asterisks may dier depending the model.
Asterisk(s) in the model code indicate a variant model and may replace (0-9) or (A-Z) in the model
code.
CAUTION
• When replacing the door handle, take care not to scratch the front of the door.
• Firmly press the handles at the supports. Make sure there is no gap between the supports and the
door.
• Tightly fasten the screws when attaching the handle.
• Check that the handle is rmly attached before using the product.
Philips screwdriver Flat-head screwdriver
1. Use a at-head screwdriver to remove the
screw covers.
‐ After detaching the handle, attach the
screw covers back on the screw holes.
2. Use a Phillips screwdriver to remove the
screws and detach the handle.
NOTE
Use these screws to fasten the handle on
the opposite side.
3. Assemble the new handle in the reverse
order of disassembly.
To Next Page
Loading...
