3-17 Samsung Electronics
Disassembly and Reassembly
No Parts Procedure Remark
4 Guard Cond 1) Pull the sensor from Guard Cond.
2) Unscrew and remove 4 screws
in the Guard Cond.
(Use +Screw Driver)
5 Cabi Back RH 1) Pull the sensor from Cabi Back RH.
2) Unscrew and remove 4 screws
on each side of the Cabinet Back RH.
(Use +Screw Driver)
NS090SDXEA_E_SM_33623A(1)_1.indd 17 2011-04-08 �� 10:54:48
To Next Page
Loading...