Installation
English34
Installation
1. Choose the position on the oor where
you need to attach the level adjustment
pad.
2. Peel the double-sided tape on the
bottom of the level adjustment pad.
3. Attach the level adjustment pad to the
oor.
4. If you need to further raise the rear
height, attach another adjustment pad
on top of the rst level adjustment pad.
NOTE
• You may skip this step if you can
level the refrigerator using a single
attachment pad.
• Make sure the ribs on the rst
adjustment pad are inserted into the
grooves of the second level adjustment
pad.
To Next Page
Loading...
Need help?
General
