English 57
Operations
Delay Appliance Load
The refrigerator responds to a DAL signal by providing a moderate load reduction for the
duration of the delay period. This function controls functions that consume a lot of energy
such as adjusting the Cooling system, running the defrost cycle, and making ice.
• DAL mode is automatically deactivated after it lasts for the amount of time stipulated
by the DAL signal (max. 4.5 hours) or when the Peak Demand Off key is pressed.
Temporary Appliance Load Reduction
The refrigerator responds to a TALR signal by aggressively reducing the load for a short
time period. This function reduces energy consumption by stopping the compressor
and controlling the functions that consume a lot of energy such as the defrost cycle and
making ice.
• TALR mode is automatically deactivated after it lasts for the received duration (max.
15 minutes), or when the Peak Demand Off key is pressed. The mode is immediately
deactivated and the refrigerator returns to the normal state when the door is opened
or closed, or the dispenser is used.
To Next Page
Loading...
Need help?
General
