Samsung RF26X - Disassemble the Freezer Drawer

setting up @
4. Remove four 10mm hex-head bolts from both sides.
5. Lift the freezer door up from the rails.
2. Remove the tilting pocket(
) by pulling strongly on both brackets(
2
)
upward at the same time.
3. Take out the lower basket(
3
) by lifting the basket up from
rail system.
1. Take out the upper drawer by lifting it up.
%*4"44&.#-&5)&'3&&;&3%3"8&3

2
3
01 4&55*/(61