Setting up your French Door Refrigerator
ADJUSTING THE FREEZER DRAWER LEVEL
Locate the height-adjuster ( 1 ) in the freezer drawer.
Unscrew the 8 Phillips screws ( 2 ) slightly to loosen the door.
Loosen the controller screw( 3 ) with a Phillips screwdriver(+).
Find the best level to align the door slope.
After adjustment, tighten the controller screw ( 3 ) and then philips screws.
1
2
3
Example) The slope is about 0.08inch(2mm) as shown below.
- Rotate the height adjuster to -2.0 to reduce the door slope.
Slope
Reference
plane
Freezer Drawer
Adjustment part
To Next Page
Loading...
