29
3-2) Refrigerator Door
DISASSEMBLY AND REASSEMBLY
Refrigerator
Door
Part Name How To Do Descriptive Picture
1. With the door opened, remove
the Cap Top Table() with a Flat
head screwdriver, and close the
door.
4. Disconnect the water tube ()
by pulling the tube fitting()
apart as shown in the picture.
3. Disconnect the electrical
connector() above the upper
left door hinge To disconnect the
connector() more easily, press
the end of the hook() and pull
connector.
2. Remove the 3 screws holding
down the Top Table and remove
the Top Table().
Be careful not to scratch or
break the parts
CAUTION
Before doing the above,
make sure that the unit is
plugged out.
CAUTION
AW3 SM-EN 2011.3.31 2:53 PM 페 이 지 2 9 i n
To Next Page
Loading...
