TOUCH SCREEN CORRECTION
The stylus touch point can be calibrated to best meet the user's needs. To adjust the stylus touch point on the
touch screen:
1. Touch the _ button two times in the right bottom corner of the settings list.
2. Touch the Touch Screen Correction on the settings list.
3. Touch the Yes button, and then a screen will appear with pointer instructions on the top.
4. Press down lightly on the center of the "+" mark. Repeat as the "+" mark moves on the screen.
f
I
I Press the center point of the cross mark carefully.
Repeat it following the cross moving on the screen.
When setup is complete, the screen wiU turned off and on again.
o If the center is not properly pointed, the cross mark appears repeatedly.
S/W UPDATE
It is the menu to check the current software version and to update it to the new software.
1. Touch the _ button two times in the right bottom corner of the settings list.
2. Touch the S/W Update on the settings list.
operat ng 65
To Next Page
Loading...
