EasyManua.ls Logo

Samsung RF4289HA - Disassemble the Flex Door

Samsung RF4289HA
86 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
u
Remove the 3 hex head bolts ( 7 ) attached to
the upper left and right door hinges with a socket
wrench (10mm).
Remove the ground screw ( 8 ) attached to the
upper left and right door hinges with a philips
screwdriver (+). Remove the upper left and right
door hinges ( 9 ).
Socket wrench
4. Lift the door straight up to remove.
u
Remove the screw ( 10 ) attached to the lower left
and right door hinges with a philips screwdriver (+).
Remove the 2 hex head bolts ( 11 ) attached to
the lower left and right door hinges with an allen
wrench (3/16"). Remove the lower left and right
door hinges ( 12 ).
o
o o o
REATTACHING THE REFRIGERATOR
DOORS
To reattach the fridge doors, assemble parts in reverse
order.
DISASSEMBLE THE FLEX DOOR
1. Take out the Flex Zone ( 1 ) by lifting it up.
2_
Take off the cover ( 2 ) w/harness with a flat-blade
screwdriver (-).
u
Disconnect the housing connector.
u Remove 2 hex head bolts from sides with a socket
wrench (10mm).
5. Lift up the Flex door from the rails.
08 setting up

Related product manuals