TOUCH SCREEN CORRECTION
The stylus touch point can be calibrated to best meet the user’s needs. To adjust the stylus touch point on the
touch screen:
1. Touch the
button two times in the right bottom corner of the settings list.
2. Touch the Touch Screen Correction on the settings list.
3. Touch the Yes button, and then a screen will appear with pointer instructions on the top.
4. Press down lightly on the center of the “+” mark. Repeat as the “+” mark moves on the screen.
• If the center is not properly pointed, the cross mark appears repeatedly.
S/W UPDATE
It is the menu to check the current software version and to update it to the new software.
1. Touch the
button two times in the right bottom corner of the settings list.
2. Touch the S/W Update on the settings list.
To Next Page
Loading...
