MAKING MINOR ADJUSTMENTS BETWEEN DOORS
Remember a level Refrigerator is necessary for getting the doors perfectly even. If you need help, review the
previous section on leveling the Refrigerator.
When the left
I
door is lower
than the right
door.
w
Adjustn
Adjustment
part
When the left
door is higher
than the right
door.
1. If you open the drawer ((_), you can see the lower hinge ([_).
2. Insert the supplied hex wrench (_) into the shaft (@) of the lower hinge.
3. Please adjust the height by turning the hex wrench ([_) clockwise ( ) or counter-clockwise ( ).
_when you turn the hex wrench counter-clockwise( ), the door will move up.
.
After adjusting the doors, please insert the supplied fastener-ring ([_),using a pair of pliers ([_),in the
gap between the hinge-grommet (_),and the lower hinge ([_). The number of fastener-rings you'll
need to insert depends on the gap.
O
Four fastener-rings are enclosed with the refrigerator.
The thickness of each fastener-ring is 0.04 inch.
16_ Setting Up
To Next Page
Loading...
