28
3-2) Refrigerator Door
DISASSEMBLY AND REASSEMBLY
Refrigerator
Door
Part Name How To Do Descriptive Picture
1. With the door opened, remove
the Top Table cap() with a Flat
head screwdriver, and close the
door.
3. Disconnect the electrical
connector() above the upper
right door hinge and the 3
electrical connectors() above
the upper left door hinge.
Disconnect the fastener in tube
fitting() and the water tube()
by pulling the tube fitting ()
apart as shown in the picture.
2. Remove the 3 screws holding
down the Top Table and remove
the Top Table().
4. Remove the 3 hex head bolts()
attatched to the upper left and right
door hinges with a Wrench(10mm).
With a Philips head screwdriver,
remove the ground screw()
attatched to the upper left and right
door hinges. Remove the upper left
and right door hinges().
To Next Page
Loading...
