14_ setting up
Setting up your French Door Refrigerator
1. Pull out the rails fully on each side of the cabinet.
7
8
5. Hook the ends of the tilting pocket (
7
) onto the support guards
(
8
) and push down until they lock into place.
6. Insert the upper drawer.
3. Tighten 4 hex head bolts completely with a socket wrench(10mm).
4. Insert the lower basket (
6
) into the rail system.
6
Remove 2 pieces of tape (
9
)
attached to the side of the drawer bin.
Reattach the tape in the same position when moving the refrigerator to
prevent scratching the drawer bin.
9
2. Attach the freezer door front onto the open slots on the sides.
ASSEMBLE THE FREEZER DRAWER
To Next Page
Loading...
