Samsung RFG298AABP - Making Minor Adjustments between Doors

Setting up your French Door Refrigerator
MAKING MINOR ADJUSTMENTS BETWEEN DOORS
Remember, a leveled refrigerator is necessary for getting the doors perfectly even. If you need help, review the
previous section on leveling the refrigerator.
When the left
door is lower
than the right
door.
When the left
door is higher
than the right
door.
Adjustment
part
Adjustment
part
16_ Setting Up
1. Pull out the freezer drawer (
1
), then you can see the lower hinge (
2
).
2. Insert the supplied allen wrench(3/16”) (
3
) into the shaft (
4
) of the lower hinge.
3. Please adjust the height by turning the hex wrench (
3
) clockwise (
) or counter-clockwise ( ).
When you turn the hex wrench counter-clockwise( ), the door will move up.
2 fastener are enclosed with the refrigerator.
The thickness of each fastener is 0.04”.
1. After adjusting the doors, please insert the supplied fastener (
6
) using a pliers (
5
) in the gap between
the hinge-grommet (
7
) and the lower hinge (
8
). The number of fastener you’ll need to insert depends
on the gap.
2
3
4
3
1