Installing the Unit
Make sure to attach the unit firmly. If the unit is not attached firmly or attached
incorrectly, it may result in malfunction or injury.
1
Insert bolt anchors to a ceiling. Use existing ceiling support or construct
a suitable support.
2
Install the suspension bolts depending on the ceiling type.
3
Screw two nuts to the suspension bolts making space for hanging the unit.
4
Hang the unit horizontally to the suspension bolts between two nuts.
5
Fasten the nuts to suspend the unit.
The washer should be fit for the hanger.
Suspension bolt
(Ø10~Ø12)
Nut
Washer
Hanger
Washer
Nut
Rubber
Rubber
Fasten the nut
Ensure that the ceiling is strong enough to support the weight of the unit.
Before hanging the unit, test the strength of each attached suspension bolt.
CAUTION
Nut
To Next Page
Loading...
