Connecting the Unit (Continued)
Setup the Centralized Individual Control (1:1, Individual Room Control)
If the 00 switch of the centralized controller is set to ON position, the
ventilators which are designated 0 of their RMC ADDRESS are operated.
To centralized individual control, set each of the RMC ADDRESS of each
ventilator to different number which is controlled by a centralized controller.
Setup the Centralized Controller
Master Ventilator
Transmitter 0
Centralized Controller
Transmitter 1
Ventilator Ventilator Ventilator
MAIN:0
RMC:0
MAIN:1
RMC:1
MAIN:2
RMC:2
MAIN:3
RMC:3
Ventilator
MAIN:4
RMC:4
Master Ventilator
MAIN:0
RMC:5
Ventilator Ventilator Ventilator
MAIN:1
RMC:6
MAIN:2
RMC:7
MAIN:3
RMC:8
Ventilator
MAIN:4
RMC:9
To Next Page
Loading...
