English 19
Installation
STEP 3 Door removal for entrance
If the refrigerator cannot pass through the entrance due to its size, follow these
instructions:
Tools required (not provided)
These tools are used for removing the doors.
Phillips screwdriver Flat-head screwdriver
Socket spanner (3/8" (10 mm)) Allen spanner (1/4" (5 mm))
Disconnect the water line
1. From the bottom rear side of the
refrigerator, pull out the water line to
the front.
NOTE
The refrigerator’s water line is a water
circulation line that connects between the
water pipe from the water source and the
hoses from the water ltering system of
the refrigerator.
Untitled-1 19 2020-12-31 2:29:12
To Next Page
Loading...
