or
Samsung 'Microwave' Diagnostic Code Quick Guide
Failure Code Cause
E-11 Open
E-12 Short
E-13 T1 Max Time Error
E-14 Dry Up / No Load
Error Code Gas Sensor Error Case
(E-1X)
E-21 Open
E-22 Short
E-23 T1 Max Time Error (Preheating not completed)
E-24 Over temperature error
E-25 Abnormal temperature is sensed at Micro Cook
E-26 Temperature is not over the fixed AD in first 3 minutes
after cooking by heater starts.
Error Code Temp. Sensor Error Case
(E-2X)
E-31 Open (When value of HEX is above “FF” for 5 seconds)
E-32 Short
E-33 The initial value of HEX is under “14” for 30 seconds while
a weight sensor in operation.
E-34 The initial value of K calculated by a weight
sensor is above and under “±28” as value of HEX.
E-35 The value of A is “-” as a weight sensor calculates.
E-36 In case the door opens during sensor cooking.
Error Code Gas Sensor Error Case
(E-1X)
E-41 Open
-
E-43 T1 Max Time Error
E-44 Dry Up
E-45 Cooling Error (3minutes)
E-46 Primary Open Error(3minutes)
E-47 The door opens during cooking
Error Code Easy/PH Sensor Error
Case (E4)
E-51 Open (Sense Failure)
E-53 Read/Write Error
E-54 Zero not to be set
Error Code EEPROM Error Case
(E-5X)
E-61 Open
E-62 Short
E-63 T1 Max Time Error
Error Code Humidity Sensor Error
Case (E-6X)
-SE- Key Short Error (10 seconds)
E-01 Door opens when the door should not be opened.
E-02 Cooking Time Setting Over Error (MWO)
E-03 Cooking Time Setting Over Error (Grill)
E-04 Cooking Time Setting Over Error (Convection)
E-05 Cooking Time Setting Over Error (Combination)
E-06 It fails to sense that the swing heater has stopped for 20
seconds during cooking.
E-08 In case function of MWO starts with spit inserted into
cavity inside.
E-09 The damper is not set to be positioned for 2 minutes.
Error Code Others (E-0X, Letter)
To Next Page
Loading...
