Installation
English28
Installation
STEP 3 Door removal for entrance
If the refrigerator cannot pass through the entrance due to its size, follow these
instructions:
Tools required (not provided)
These tools are used for removing the doors.
Phillips screwdriver Flat-head
screwdriver
Socket spanner
(10 mm)
Allen spanner
(5 mm)
To detach the door
• Make sure that you lift the door straight up so the hinges are not bent or broken.
• Be careful not to pinch wire harness on the door.
• Place doors on a protected surface to prevent scratching or damage.
• If necessary, have two people disassemble the doors.
1. With the doors closed, use a Phillips
screwdriver to remove the 3 screws in
the top cover.
NOTE
Be careful not to damage the sensor
harness with the top cover.
Untitled-2 28 2018-12-27 11:31:22
To Next Page
Loading...
