Part name
Upper
Duckwork
Descriptive PictureHow To Do
Remove the lamp cover by unlocking the tabs
and pulling out the cover.
Remove the screws(2) and upper fan ductwork
while disconnecting the wire connector.
(lamp and thermistor)
40
5. DISASSEMBLY AND REASSEMBLY
Part name
Evaporator
Cover
Descriptive PictureHow To Do
Remove the water tank from the evaporator
cover by unscrewing the screws.
Remove the screws at the evaporator cover and
disconnect the wire connector
Take off motor and lamp wire connetor located
on the upper liner
Remove the Evaporator cover in the direction of
the arrow as shown.
5-12) UPPER DUCKWORK
To Next Page
Loading...
