42
5. DISASSEMBLY AND REASSEMBLY
1. Insert a flat-blade screwdriver on the slot as shown,
and unlock the tabs.
2. Disconnect the wire connector.
The door handles allow access into the refrigerator
and freezer. They are front mounted with screws.
1. Lift the handle upward motion with on.
The door gasket is a molded gasket set into a
channel located in the door liner.
1. Open the door.
2. Grasp the gasket and pull in an outward motion
until the molded gasket separates from the
door liner.
Control Panel
Door Handle
Door Gasket
5-2) Refrigerator Disassembly
To Next Page
Loading...
