safety information _15
SAVING ENERGY TIPS
• Install the appliance in a cool, dry room with adequate
ventilation.
• Ensure that it is not exposed to direct sunlight and never
put it near a direct source of heat (radiator, for example).
• Never block any vents or grilles on the appliance.
• Allow warm food to cool down before placing it in the
appliance.
• Put frozen food in the refrigerator to thaw.You can then
use the low temperatures of the frozen products to cool
food in the refrigerator.
• Do not keep the door of the appliance open for too long
when putting food in or taking food out.
• The shorter time for which the door is open, the less ice
will form in the freezer.
• Clean the rear of the refrigerator regularly. Dust
increases energy consumption.
• Do not set temperature colder than necessary.
• Ensure sufficient air exhaust at the refrigerator base and
at the back wall of the refrigerator. Do not cover air vent
openings.
• Allow clearance to the right, left, back and top when
installing. This will help reduce power consumption and
keep your energy bills lower.
safety information
• For the most efficient use of energy, please keep the all
inner fittings such as baskets, drawers, shelves on the
position supplied by manufacturer.
To Next Page
Loading...
Need help?
General
