20
3-3) Interior-Fridge
DISASSEMBLY & REASSEMBLY
Disconnect the housing connector(Reed
S/W) by gently pulling them apart.
Remove the 2 screws and replace the
Latch.
PART NAME DESCRIPTION
Latch
FIGURE
Pull the shelf out to the hole point.
And then remove it by turning and lifting it
up.
Remove all Drawers before
disassembling the cover.
Pull the cover out to the hole point.
And then remove it by turning and lifting it
up.
Remove the Water Tank from the
Evaporator cover by unscrewing the
screws.
PART NAME DESCRIPTION
Shelf
Drawer
Cover
Water Tank
FIGURE
To Next Page
Loading...
