32
DISASSEMBLY & REASSEMBLY
Disconnect the wires by gently pulling
them apart.
If necessary, remove the Reed S/W
using flat head screwdriver.
Remove the Earth screw and the 3 bolts
as shown.
Remove the Upper Hinge with handling
Wires.
Remove the door from the lower hinge
by lifting up the door straight.
Be careful not to pinch the water tubing
and the wire harness on the door.
PART NAME DESCRIPTION
Door
FIGURE
Separate the Water Line by pressing the
coupler(①) and pulling the water
tube(②) away.
When you reassemble the door, be
careful that the water tube match the
same color.
With the Door closed, remove a screw
on the Upper Hinge Cover.
To Next Page
Loading...
