19
Λ
3) Attach the panel to the indoor unit, then push it to right or
left to secure the panel. Narrow side of hole on the panel
must be inserted between the screw and the indoor unit.
4) Adjust the location of panel so that there is no gap between
the panel and ceiling, then tighten the screw completely.
5)
Install the fixing bracket. Each air filter needs its own bracket.
6) Reinstall the front grille.
◆ The installation of front grille is in the reverse order of disassembly.
✻✻
020/026/032/035/040
✻✻
◆ Fix 1 bracket to the rest hole on the panel with a supplied screw.
✻✻
052/070/072
✻✻
◆ Fix 2 brackets to two holes on right and left side of the panel with screws.
DVM TM(chapter5-1)_E<03759 6/14/02 2:31 PM Page 19
To Next Page
Loading...